How to make a simple robots without using a program

This time I post how to make simple robots without using a program by using the material used, does not require an expensive cost, we make a robot like Animals Beetle (we name the Robot Beetle). so guys, check this out

MATERIALS

- AA battery holder

- Some solder wire

- Some of the wires connecting the motor to

- 2 AA batteries

- 2 1.5 V motor (preferably identical/similar)

- Slide switch

- 2 SPDT (Single Pole Double Throw) switch

- 1-2 paperclips

- Some glue

Don't be too primed for ingredients, as I am sure you can find at secondhand toys or a radio.

EQUIPMENT

- A wire cutter and stripper

- A pliers

- Hot glue

- Solder

- Multimeter

You can borrow the equipment for your father.

STEPS:

1. Check the batteries are still usable or not, make sure it can be used.

2. Set the cable holder, don't forget this "3 CONNECTION CABLE"

3. Mounting the antenna, attach 2 SPDT Switches with hot glue in front of shareholders try to do it as perfect as possible.

4. align the paper clip, to form a straight line, then cut with wire cutters into 2 parts, do well to customize the size of the balance.

5. bend the paper clip that is already divided, as in the picture. same to me balanced.

6. Paste and Glue the paper clip on each SPDT Switches up top.

7. driving Motor, attach the motor with the best angle of 40 degrees, or at least not too far from 40 degrees. Do as best as possible.

8. a wheel, the wheel is a wheel that I use of the toy, might be hard to find in stores. For the wheel hadn't too closely, use if there is no other alternative.

Paste and Glue in the back.

9. arrange the cables and connect, connect the cables well and rightly, do not get one pole (+) and (-) so that does no error occurred (dissipates energy).

10. Decorative robot, this Step is optional (not required), I recommend to decorate as well and as good as you want.

11. check cable arrangement and scheme of the robot.

12. How this tool works, when a robot on a wall or an obstacle, it triggers the switch L (left) or the R (right) in the shape of the antenna, when switch is depressed then the motor stops and see if one motor stops then the balance will be rocking and it make the robot turn away from obstacles.

Please try and finish.